Clifford SmartWindows 4 Bedienungsanleitung

Standard Features of the Concept 100*Programmable (+) or (-) require relays.System ComponentsThe Concept 100 installation kit contains the following c

Installer-Programmable FeaturesTo access the installer-programmable features, use the procedure defined in the User-Programmable s ection, but after c

System Checklist & Troubleshooting (Continued)Step 3.Test the chirps.Close all doors and arm the Concept 100 by pressing the button on the remot

System Checklist & Troubleshooting (Continued)Step 5.Test the door locks.Arm the sys tem by press ing the button on the re mote con trol.nDoors

System Checklist & Troubleshooting (Continued)Step 9.Test the dis arm func tion.nDisarm by pressing the button on the remote control. The follo

System Checklist & Troubleshooting (Continued)Step 14.Test the AutoArming By pass fea ture.Disarm the system. Turn the ignition to the “ON” posit

Wiring Description for the 4-Pin ConnectorPin Wire Color Con nects to1 Green/Blue Ignition Output2 White/Blue Starter Output3 White/Brown Ignition Inp

Con cept 100/199 3

Passenger Compartment ConnectionsControl Unit and External ReceiverThe Concept 100 con trol unit must be in stalled in side the ve hi cle. Un der no c

Passenger Compartment Connections (Continued)Trunk TriggerVehicles with a ground-switching trunk light will interface directly with the Concept 100 (o

Hood TriggerVehicles with a ground-switching hood light will interface directly with the Concept 100 (on positi ve switching Rolls-Royce vehicles, use

FACT—False Alarm Control and TestThe system microprocessor automatically checks for another activated sensor or trigger before sound ing the siren a s

Programmable FeaturesConcept 100 comes from the factory with its features preprogrammed as noted in bold text in the tables on pages 9 and 10. Somefea

User-Programmable FeaturesUser-Programmable Features (1 Chirp = OFF, 2 Chirps = ON)Fea tureSelectUnmarked 1 Unmarked 2 Unmarked 3 Unmarked 4✱ 1 Add N